4E-SW6 Remote Controlled Zone Expander module

The 4E-SW6 is a DIN-mounted module to convert one monitored channel into six channels.

4E-SW6 is a DIN-rail mounted 100V audio matrix with 2 inputs

and 6 outputs, dedicated for both 4EVAC Compact and Impact

systems.

4E-SW6 has two 100V audio inputs (CHA, CHB) which connect

directly to amplifier outputs. 4E-SW6 expands the number of

independent loudspeaker lines with individual surveillance and

short-circuit isolator units (Loopdrive). Each loudspeaker line

can handle up to 200 W load and can be assigned as a separate individual zone. One input can

accept maximum 500 W of power, this is also the limit for total load of all 6 output lines together.

NOTE:

With IMPACT: Multiple (N) 4E-SW6 modules can be fed in parallel from the same pair of

amplifiers, creating 2 x 6*N matrix.

With COMPACT: Amplifier output (i.e. loudspeaker line output of Compact 500) can be

connected to maximum one 4E-SW6 module, feeding maximum 6 loudspeaker lines – outputs

of 4E-SW6.

4E-SW6 is controlled by the main system controller (Compact 500 or Impact Controller) via L-Net,

receiving in real time routing information for each output line in order to connect to channel A,

channel B or internal bus C.

Because of higher power demand routing information for each output line in order to connect to

channel A, channel B or internal bus C, compared to other L-Net devices it features additional 24V

power input. 4E-SW6 supports also redundant network link.